Application
Special features
Parts and characteristics
Useful additions
Materials and surfaces
Maintenance
The X-AIR-PCASE230V enclosure is used for the fitting of a zone module or zone master. The X-AIR-PCASE230V enclosure comes with two integral mounting rails for a zone module / zone master, a four-way splitter X-SENS-SPLITTER and other components. The enclosure is made of ABS plastic. A pre-wired transformer in the X-AIR-PCASE230V supplies the zone module or the zone master via a two-pole connection plug with 24 V AC. The transformer has a micro fuse. As standard, the X-AIR-PCASE230V comes with a mounting bracket with four fixing holes (Ø5 mm) for wall installation. If you need to fix X-AIR-PCASE230V to a ceiling, use the X-AIR.PCASE-C mounting bracket (accessory). The X-AIR-PCASE230V is delivered without a zone module, zone master or X-SENS-SPLITTER. These have to be installed on site, by others. 3 x 4-wire feed-through terminal blocks L1/N/PE are provided for the connection of the supply voltage. Cables can be fed through the rubber membranes at the side. The lid of the X-AIR-PCASE230V is secured with a safety device that prevents it from being opened by unauthorised persons. It can only be opened with a Phillips screwdriver.
Supply voltage | 230 V AC ±10%, 50 Hz |
Power consumption (transformer) | 35 VA max. |
Micro fuse (transformer) | T250 mA (Ø5 × 20 mm, EN 60127-2/III) |
Connection (spring-loaded terminals, 2.5 mm² max.) | 4-wire double terminals |
Temperature – operation | -10 to 40 °C |
Temperature – storage | -20 to 50 °C |
Protection level | IP 20 (EN 60529) |
IEC protection class | I (protective earth) |
Installation location | Wall or ceiling installation (optional) |
Dimensions with wall mounting bracket (B × T × H) | Approx. 282 × 267 × 155 mm with closed lid, approx. 282 × 300 × 380 mm with open lid |
Dimensions with ceiling mounting bracket (B × T × H) | Approx. 282 × 330 × 150 mm with closed lid, approx. 282 × 330 × 380 mm with open lid |
Enclosure | ABS plastic, UL 94 V-0, grey (RAL 7037) |
Weight | Approx. 2700 g |
The X-AIR-PCASE230V enclosure is used for the fitting of a zone module or zone master. The enclosure is a plastic casing made of ABS. As standard, PCASE230V comes with a mounting bracket for wall installation. The mounting bracket has 4 holes (Ø5 mm) so that you can screw-fix it to the wall. If you need to fix the enclosure to a ceiling, use the X-AIR.PCASE-C mounting bracket (accessory). The X-AIR-PCASE230V is intended for use with a zone master or zone module and fitted with two mounting rails for installation. The X-AIR-PCASE230V is delivered without a zone module, zone master or splitter. These have to be installed on site, by others. 3 x 4-wire feed-through terminal blocks L1/N/PE are provided for the connection of the supply voltage. A 230 V/24 V AC transformer including micro fuse for supplying voltage to the various components is factory installed and wired. Cables can be fed through the rubber membranes at the side. The lid of the X-AIR-PCASE230V is secured with a safety device that prevents it from being opened by unauthorised persons. It can only be opened with a Phillips screwdriver.
Special features
Materials and surfaces
Technical data
X-AIR-PCASE230V |
| |
1 |
Installation and commissioning
Deel deze pagina
Beveel deze pagina aan
U kunt deze pagina delen door de link te delen.
Contact
Bedankt voor uw bericht!
Uw aanbeveling is verzonden naar de ontvanger.
Contact
Wij zijn er om u te helpen.
Geef alstublieft het onderwerp van uw vraag en uw contactgegevens.
Tel.: +31(0)183 767300 | Fax: +31(0)183 767399
Contact
Bedankt voor uw bericht!
Uw bericht is ontvangen door ons Service Center en wordt verwerkt.
Onze service-afdeling neemt contact met u op.
Als u algemene vragen over onze producten en services heeft, kunt u ons ook bereiken op:
Tel.: +31(0)183 767300 | Fax: +31(0)183 767399
Contact
Wij zijn er om u te helpen.
Geef alstublieft het onderwerp van uw vraag en uw contactgegevens.
Tel.: +31(0)183 767300 | Fax: +31(0)183 767399
Contact
Bedankt voor uw bericht!
Uw bericht is ontvangen door ons Service Center en wordt verwerkt.
Onze service-afdeling neemt contact met u op.
Als u algemene vragen over onze producten en services heeft, kunt u ons ook bereiken op:
Tel.: +31(0)183 767300 | Fax: +31(0)183 767399